Blog

Ways to Prevent Mask Fogging

01 Apr 21

A foggy mask ruins an entire dive or swim, destroying your view of fish and coral, and impeding communication between divers. It can also be dangerous. A diver distracted by a foggy mask can lose track of his buoyancy or his surroundings.

The good news is that it's possible to prevent any mask — scuba diving or snorkeling— from fogging. But you must treat new masks and used masks in different ways.

New Scuba and Snorkeling Masks

New scuba diving masks have residue left over from the manufacturing process on the lens. Unless you remove this coating from the inside of the lens, you will find your the mask constantly fogging up no matter how much defogging agent you use. There are two tried-and-true methods to remove the residue.

The Toothpaste Trick

Squirt toothpaste on the inside of the lens and rub it around with your finger or a soft cloth for a few minutes. The simpler the toothpaste, the better, so try to find a paste without bleaching agents and confetti. It may help to leave toothpaste on the mask overnight or to scrub the mask several times to allow the chemicals to react. Avoid using an extremely abrasive toothpaste or rough cloth, as these can scratch the inside of the glass. This trick works, but it's not as good as "flaming" the mask.

The Flame Trick Run the tip of a flame over the inside of the lens until the glass turns black; the flame burns the fog-creating residue off. A lighter or a tapered candle works well for this trick. 

Once the inside of the mask lens is totally black, wait for the mask to cool and wipe away the soot with a soft cloth. Repeat this process two or three times until it is difficult to get the glass to turn black.

Do not allow the glass to become extremely hot, and do not attempt this trick on masks with plastic lenses (they will melt). Be sure to keep the flame away from the soft silicone skirt of the mask, as it will melt with very little heat.

Saliva Spit

Saliva Spit on the inside of the mask and rub it around with your finger. Dunk the mask briefly in fresh water. The goal is to leave a thin layer of saliva on the inside of the glass. Spitting does not work well if the mask dries out before diving, so use this technique immediately before the dive.

Commercial Defogging Agents

Commercial defogging agents are specifically designed to coat a mask's lens, and many divers find these products more effective than spit. Put a few drops of the defogging liquid in the mask, rub it around with a finger, and rinse briefly with fresh water. Remember, the idea is to leave a thin layer of the defogging agent inside the mask, so do not rub out the defog when rinsing the mask. Baby Shampoo You can use baby shampoo just like a commercial defogging solution. Many divers carry a bottle of watered-down baby shampoo with their dive gear. A few drops rubbed into the lens and then briefly rinsed out keeps a mask from fogging. Baby shampoo is preferable to standard shampoo, as it is generally hypo-allergenic, less irritating to your eyes, and biodegradable. Baby shampoo smells good, too.

Glycerin Soaps and Dishwashing Detergents

Glycerin soaps and dishwashing detergents can be used the same way as baby shampoo. Put a few drops on the inside of the mask, rub them in, and rinse briefly. If a mask leaks, it is possible that the water will carry whatever defogging agent is used into the diver's eyes. The one problem with these products is that they really burn the eyes. Glycerin soap and dishwashing detergents sometimes are not biodegradable. Be sure to not dump any non-biodegradable defogging agents into the water.